With just over 1600 sqft, the single car garage Saddlebrook model offers three bedrooms and2 ½ bathrooms. The foyer entry offers a total view up the stairway and through to the back of the home. The functional mudroom attaching to the garage, joins a half bath, full closet and bench with cubbies, there is plenty of storage room and is perfect for busy families. At the back of the home, the functional kitchen offers a continuous view of the dining nook and the spacious living area. This open area flows beautifully and is well-designed for entertaining. Upstairs, leads to a sizable loft area with an included custom computer desk, access to a full bath, laundry and linen closet. Two full bedrooms with spacious closets are situated at the back of the home. The beautiful master bedroom with vaulted ceilings overlooks the front yard. The generous walk-in closet offers a full-sized window allowing for plenty of natural light. The 5-piece ensuite bathroom is perfectly laid out with a separated toilet and his and her sinks. The home is completed with a single car garage, quartz/granite countertops throughout the home and an unfinished basement, perfect for extra storage or to be finished with your favorite touches.
- 3 bedrooms
- 2.5 bathrooms
- walk-in closet
- loft on the upper floor
- open to below
Connect with the builder for more details.
|Number Of Floors:||2.0|
|Total Finished Area:||1606 sq ft (149 m2)|
|Full Ensuite Bathrooms:||1|
|Amenities:||Laundry – Insuite|
|Parking:||Single Garage Attached|
THE ALBERTA NEW HOME WARRANTY PROGRAM
Buying a Klair home gives you a peace of mind knowing that your home is covered under the industry-leading warranty program in Alberta i.e. The Alberta New Homes Warranty Program. Below is the detailed information about the New Buyer Protection Act.
Alberta’s New Home Buyer Protection Act stipulates that all new homes must include warranty coverage of one year for labour and materials, two years for delivery, and distribution systems, five years for building envelope protection and 10 years for major structural components.
The following are more detailed explanations of these coverages as well as warranty coverage limits and commencement dates.
1 YEAR LABOUR & MATERIALS
Mandatory warranty includes one year’s coverage for defects in materials and labour. This addresses issues with the way your home was built or the materials it was built with. It includes such items as flooring, trim and fixtures.
For a single-family home, a multi-family unit or multi-family common property, this coverage applies for one year starting on the warranty commencement date (see below).
2 YEAR DISTRIBUTION SYSTEMS
New home warranty must cover defects in labour and materials related to heating, electrical and plumbing systems for two years from the warranty commencement date. This applies to single-family homes, multi-family units and warrantable multi-family common property.
5 YEAR BUILDING ENVELOPE
Homebuilders in Alberta must provide five years’ coverage for defects in the building envelope, which the New Home Buyer Protection Act defines as the system of components that separate the controlled interior air from the exterior (for example, the wall framing and cladding, roof and window installation).
This coverage spans five years from the warranty commencement date for a single-family home or multi-family common property.
Warranty providers must offer an optional two-year extension on building envelope coverage for a total of seven years’ coverage.
10 YEAR STRUCTURAL INTEGRITY
The mandatory warranty covers the key structural components (for example, the frame and foundation) of single-family homes and multi-family dwellings for 10 years from the warranty commencement date. Coverage applies to defects in material and labour that result in the failure of a load-bearing part of the new home or cause structural damage that materially and adversely affects the owners’ ability to use and safely occupy the home.
If a new home is uninhabitable as a result of a defect or while warranty work is underway, the Program will pay up to $150 a day (to a maximum of $15,000) for reasonable living expenses incurred by the insured.
WARRANTY COVERAGE LIMITS
For a single-family home: The lesser of the purchase price (excluding land) and $265,000.
For a multi-family unit registered under a condominium plan: the lesser of the purchase price and $130,000.
For warrantable common property in a multi-family building or for the property for which a condominium corporation is responsible under its bylaws: $130,000 times the number of single units in the building to a maximum of $3,300,000 per building.
For a non-condominium multi-family unit (for example, a duplex unit or row townhome with no warrantable common property): the lesser of the purchase price and $265,000.
To allow our Builder Members to customize their warranty offerings and give their customers even greater peace of mind, the Program offers several optional warranty products that go beyond the mandatory “1-2-5-10” coverages.