The Tyne16
252 Emerald Dr, Red Deer, AB, Canada, T4E 1A6
Base Price: | Contact builder for price |
---|---|
Build: | Quick Possession |
Type: | Single Family |
Bedrooms: | 3 |
Bathrooms: | 2.5 |
NHLS ID: | #96408 |
Description
This is a popular family floorplan built by Mason Martin Homes that features 3 bedrooms, 2.5 baths, den/flex area, and a large double attached garage. As you walk into the stunning entrance, you will see numerous features throughout. The kitchen features a huge island, quartz countertops, walk-through pantry, and stainless-steel appliances. The Living Room not only has a decorative feature wall, but also a modern electric fireplace, with T.V. location above. The spindled staircase leads you upstairs to a large master bedroom (with ensuite), second floor laundry, den/flex area, and 2 additional bedrooms. Located in the beautiful community of Evergreen, this home is conveniently located near shopping, restaurants, schools, fitness facilities, and so much more. Truly a great place to call home.
Interior
Number Of Floors: | 2.0 |
---|---|
Total Finished Area: | 1740 sq ft (162 m2) |
Total Floor Below Grade: | 935 sq ft (87 m2) |
Bedrooms: | 3 |
---|---|
Above Grade: | 3 |
Full Bathrooms: | 2 |
Half Bathrooms: | 1 |
Full Ensuite Bathrooms: | 1 |
Exterior
Amenities: | Laundry – Insuite |
---|
Parking: | Double Garage Attached |
---|
Warranty
Warranty Terms & Conditions
1-2-5-10: Protection for every homebuyer
Alberta’s New Home Buyer Protection Act (NHBPA), which took effect in February 2014, reflects the Government’s desire to ensure all new homebuyers receive warranty protection, clear expectations and an ownership experience protected from unpleasant surprises – the benefits our Builder Members’ customers have been enjoying for over 40 years.
According to the new legislation:
- Every homebuilder must provide proof of warranty coverage to obtain Alberta building permits
- A Government-managed registry will provide public access to key dates and specific information about new home warranties
- At a minimum, the warranty on each new home whose building permit application was submitted after February 1, 2014, will provide “1-2-5-10” coverage.
1-2-5-10 Coverage
Alberta’s New Home Buyer Protection Act stipulates that all new homes must include warranty coverage of one year for labour and materials, two years for delivery and distribution systems, five years for building envelope protection and 10 years for major structural components.
Following are more detailed explanations of these coverages as well as warranty coverage limits and commencement dates.
1 Year Labour & Materials
The warranty includes one year’s coverage for defects in materials and labour. This addresses issues with the way your home was built or the materials it was built with. It includes such items as flooring, trim and fixtures.
For a single-family home, a multi-family unit or multi-family common property, this coverage applies for one year starting on the warranty commencement date (see below).
2 Year Distribution Systems
A new home warranty must cover defects in labour and materials related to heating, electrical and plumbing systems for two years from the warranty commencement date. This applies to single-family homes, multi-family units and warrantable multi-family common property.
5 Year Building Envelope
Homebuilders in Alberta must provide five years’ coverage for defects in the building envelope, which the New Home Buyer Protection Act defines as the system of components that separate the controlled interior air from the exterior (for example, the wall framing and cladding, roof and window installation).
This coverage spans five years from the warranty commencement date for a single-family home or for multi-family common property.
Warranty providers must offer an optional two-year extension on building envelope coverage for a total of seven years’ coverage.
10 Year Structural Integrity
The warranty covers the key structural components (for example, the frame and foundation) of single-family homes and multi-family dwellings for 10 years from the warranty commencement date. Coverage applies to defects in material and labour that result in the failure of a load-bearing part of the new home or cause structural damage that materially and adversely affects the owners’ ability to use and safely occupy the home.
Living Expenses
If a new home is uninhabitable as a result of a defect or while warranty work is underway, the Program will pay up to $150 a day (to a maximum of $15,000) for reasonable living expenses incurred by the insured.
Warranty Coverage Limits
For a single-family home: The lesser of the purchase price (excluding land) and $265,000.
For a multi-family unit registered under a condominium plan: the lesser of the purchase price and $130,000.
For warrantable common property in a multi-family building or for the property for which a condominium corporation is responsible under its bylaws: $130,000 times the number of single units in the building to a maximum of $3,300,000 per building.
For a non-condominium multi-family unit (for example, a duplex unit or row townhome with no warrantable common property): the lesser of the purchase price and $265,000.
To allow our Builder Members to customize their warranty offerings and give their customers even greater peace of mind, the Program offers several optional warranty products that go beyond the “1-2-5-10” coverages.
Commencement Dates
For a single-family home: the earliest of (1) the date a new home is first occupied; and (2) the date an accredited agency, accredited municipality, or accredited regional services commission grants permission to occupy a new home.
For a non-condominium multi-family unit (for example, a duplex unit or row town home with no warrantable common property): the earliest of (1) the date a new home is first occupied; and (2) the date an accredited agency, accredited municipality, or accredited regional services commission grants permission to occupy a new home.
For a multi-family unit registered under a condominium plan: the earliest of (1) the date of occupancy; and (2) the date an accredited agency, accredited municipality, or accredited regional services commission grants permission to occupy a new home.
For warrantable common property in a multi-family building or for the property for which a condominium corporation is responsible under its bylaws: (1) the title to an inhabitable unit in a building or building in a phase of development of a condominium, a cooperative or multiple family dwelling is transferred from the Builder to a purchaser of a unit in an arm’s length transaction; and (2) the Builder has agreed with a qualified person to have the qualified person prepare a building assessment report for the building or for a phase of development within 180 days of the transfer of title described in (1).
Enhanced Protection
To allow our Builder Members to customize their warranty offerings and give their customers even greater peace of mind, the Program offers optional warranty products that go beyond the province’s “1-2-5-10” coverages:
- Pre-Possession Insurance (single-family homes)
- Deposit Insurance (multi-family units)
- Extended Building Envelope Coverage
Pre-Possession Insurance
A combination of deposit insurance and home completion insurance, optional* Pre-Possession Insurance protects a purchaser’s investment in a single-family home from the time a deposit is made until the warranty commencement date. In the unlikely event of default by a Builder Member, the Program will reimburse the purchaser’s deposits up to 20% of the single-family home’s purchase price (excluding land) to a maximum of $100,000.
* Pre-possession insurance is an optional product that the Program offers to our Builder Members. The Government of Alberta does not mandate inclusion of this coverage in a new home warranty.
Deposit Insurance
In the unlikely event of default by a Builder Member of the Program, optional* Deposit Insurance covers a purchaser’s deposits on a multi-family home up to 20% of the home price (excluding land) to a maximum of $50,000. (Maximum amount is project-specific and may fluctuate; please confirm the amount with your Builder.) Deposit insurance begins upon payment of the initial deposit under the Purchase Agreement and ends when the unit’s warranty coverage commences.
* Deposit insurance is an optional product that the Program offers to our Builder Members. The Government of Alberta does not mandate inclusion of this coverage in a new home warranty.
Extended 2 year Building Envelope
Optional building envelope coverage protects purchasers from defects in the building envelope for two years over and above the five-year coverage, extending the coverage period to a maximum of seven years from the warranty commencement date.
For multi-family units, only the Builder Member or condominium corporation may opt for this additional coverage at the time of the project application.