- 1532 Sq Ft
- Two Storey
- 3 bedrooms
- 2.5 bathrooms
- 4-piece ensuite option
- separate nook
- spacious utility room
- attached garage
Specifications – Ironwood Homes
Our name is our legacy and we believe the best way to protect our tradition is to put your home on a solid, trouble free foundation. Many more options, which are not listed are also available and are designed to give our customers the freedom to customize their home to their exact needs.
- All exterior walls and bearing walls sit upon 2900 psi concrete footings sized 8″ x 20″.
- 8′ high basement concrete walls are formed on site of 2900 psi concrete c/w entrapped air.
- 3 1/2″ 2900 psi concrete basement floor sits over 8″ of compacted gravel.
- 12′-14′ engineered piles support the garage grade beam, formed of 2900 psi concrete and 10mm rebar.
- A 4″ garage floor slab is made of 3988 psi special mix concrete reinforced with rebar and hand trowelled for maximum air entrapment.
- Solid wood spruce floor joist system enginered to either 12″ o.c., 16″ o.c., or double joist’s @ 16″o.c.
- OSB subfloor.
- 2×6 exterior walls @ 16″ o.c..
- Basement frost walls & interior walls are 2×4 @ 16″ o.c..
- Double 4.5″ Royal vinyl siding (choice of 18 colors). Royal AlumniPro fascia and soffit cladding. 5″ eavestroughs.
- Driveway made of 3988 psi Duramix concrete reinforced with rebar and with support trenches running from the sreet to the garage. Edges are thickened to 5 1/2″.
- Front steps 8′ or less in width are 3988 psi concrete poured in place. Oversized front verandahs are wood framed.
- All exterior concrete is sprayed with a curing compound (not a “cure & seal” product) at the time of placing. This helps the top layer to bind to the rest of the concrete, forming a more uniformly strong concrete.
- 3 tab asphalt shingles. (This is dependant upon architectural controls in the subdivision)
WINDOWS AND DOORS
- All windows and doors to be manufactured by “Gienow Windows”
- Front entrance door to be single fibreglass c/w 1/2 lite Simplicity glass and smooth operating, permanently lubricated ball bearing hinges.
- All exterior doors feature ball bearing hinges, adjustable striker plates and a smooth fibreglass finish.
- Low maintenance Vinyl picture and sliders. Glass to be clear double glazed. Rain-glass included for bathroom privacy.
- All fibreglass and acrylic products (showers, soaker tubs etc.) supplied by Hytec Products.
- 50 US gallon John Wood power vented hot water tank.
- All internal water lines to be Bow Pex with home run manifold system.
- Water line shut offs for all toilets and sinks included.
- Toilet fixtures to be American Standard “Colony”
- Kitchen faucets to be single lever chrome with built in spray (Delta 470).
- Basin faucets to be chrome single lever (Delta Innovation 580).
- Soaker tub faucets to be chrome double lever (Delta Classic 2705). (only applies to 4-piece models)
- Roughed-in triple plumbing included for models without basment development.
- Dishwasher hook up included.
ELECTRICAL & MEDIA
- 100 AMP service with a 32 circuit capacity panel, or as required.
- Smoke detectors on all levels of home (including unfinished basements) as required by building code. Floor levels that have a bedroom present also include a carbon monoxide detector.
- Telephone rough-ins in 3 locations.
- T.V. cable rough-ins in 2 locations.
- Cable modem for High Speed Internet service and a Digital Cable Terminal (DCT) for Digital Cable included. Shaw to supply 3 months of free cable upon hook up.
- Plug c/w bell wire for infrared sensor of overhead operator in garage included.
- Soffit plug and switch included.
- Light fixtures included up to ($.60 per square foot excluding GST).
- One gas fired Lennox Merit 90 G43 high efficiency furnace.
- Lennox Merv10 high efficiency pleated media air cleaner.
- If the basement level is developed heat ducts are mounted in ceiling and return airs to be run down to floor and placed in recreation room plus additional bedrooms.
INSULATION TO PAINT
- Basement perimeter frost walls are wood framed and insulated with R12 c/w 6mil polyethylene vapour barrier.
- All home exterior walls are insulated with R-20 owens corning pink fibreglass insulation.
- Roofs (including garage) are insulated with R-40 loose fill fibreglass insulation. (This has less settlement than cellulose)
- Every effort is made to ensure the home is airtight as possible:
- Vapour barriers are caulked at all wall plate intersections. (including basements and garages)
- The entire perimeter is caulked at the joist/foundation intersection with acoustical sealant.
- Windows are sealed and insulated with low expanding polyurethane foam.
- Header joist ends are insulated with 2″ Rigid EPS insulation…another Salvi innovation providing an R-value of 30. With out this method the floor system is virtually uninsulated @ joist nailing intersections.
- Walls are drywalled with 1/2″ board. Screwed on exterior walls and nailed and glued on interior walls.
- 1/2″ non sag drywall for ceilings.
- Cement board is used for shower and other high moisture areas.
- Splatter coat texture for all finished ceilings.
- Soft line corner bead for all vertical corners in main living areas. (Excludes closed off areas – bed’s, bath’s, etc.)
WOODWORK & TRIM
- Choice of 3 distinct interior door styles; 2 Panel shaker or 3 panel craftsman or Sante-Fe.
- Painted 3 1/4″ window casings.
- Painted 3 1/4″ baseboard.
- Cove crown door headers for all main living areas.
- All closet shelving to be cabinet grade white melamine.
- Master bedroom c/w closet organizer.
- All stub walls are capped with solid wood.
CABINETS & COUNTERTOPS
- All cabinets custom sized and built to fit by Salvi’s own artisans.
- All drawers to be blum metabox system (powder coated steel sides and slides).
- Undersink tip out soap trays and undercounter garbage bin.
- All island backs to be finished in wood (not drywall).
- All gable ends to be high grade (A-face) real wood veneer.
- European crown molding included for kitchens.
- All wood work finished with a 4 step process high solids conversion varnish.
- Kitchen counters to be bevel-edge laminate c/w upgraded “crystal” finish.
- Bathroom counters to be bevel-edge laminate c/w upgraded “crystal” finish.
- Option of 1 medicine cabinet or bank of drawers per bathroom.
- Hinged bench seat (on specified models) with a shelf/hooks above in utility room.
- Allowance of $4.26 per sqft.
- All floorcoverings are picked from our in house design center…from exotic hardwoods, to high density carpet, to imported Italian tile.
- Saxony or Frieze carpeted areas feature Fortress 7 Lb. density 3/8″ thick underpad.
- Berber carpeted areas feature Ecotek Gold 6.5lb density 3/8″ thick fibreglass reinforced underpad.
- Appalachian hardwood if applicable to be properly seasoned and acclimatized prior to install. This could even require the use of dehumidifiers to ensure a long lasting gap free installation.
- Tile areas if applicable are to be installed over 3/8″ spruce plywood underlay with a quality polymer modified thin set.
- All door hardware by Weiser lock.
- Interior passage sets to be “Fairfax” knob handles c/w brushed chrome finish.
- Paper holders and towel bars to be Taymor “Naples” series c/w chrome finish.
- Shower door frames to be chrome.
What can’t be specified is our passion and commitment.
Nothing worth achieving comes easily; that’s why we work tirelessly to make your dreams a reality.
|Number Of Floors:||2|
|Total Finished Area:||1532 sq ft (142 m2)|
|Full Ensuite Bathrooms:||1|
|Parking:||Double Garage Attached|